![](/images/new-backgrounds/1149361/149361169x1.webp)
Configuration
Configuration and Calibration LCD Displays
Table 9 • Printer Parameters and Other LCD Displays (Sheet 11 of 15)
Parameter Action/Explanation
Selecting Prefix and Delimiter Characters (next three parameters)
Prefix and delimiter characters are
Do not use the same hex value for the control, format, and delimiter characters. The printer must see different characters to function properly.
CONTROL PREFIX Control Prefix Character
The printer looks for this
Default: 7E (tilde - displayed as a black square)
Range: 00 to FF
1.Press SELECT to select the parameter.
2.Press PLUS (+) to increase the value of the selected digit.
3.Press MINUS
4.Press SELECT to accept any changes and deselect the parameter.
FORMAT PREFIX Format Prefix Character
The printer looks for this
Default: 5E (caret)
Range: 00 to FF
1.Press SELECT to select the parameter.
2.Press PLUS (+) to increase the value of the selected digit.
3.Press MINUS
4.Press SELECT to accept any changes and deselect the parameter.
DELIMITER CHAR Delimiter Character
The delimiter character is a
Default: 2C (comma)
Range: 00 to FF
1.Press SELECT to select the parameter.
2.Press PLUS (+) to increase the value of the selected digit.
3.Press MINUS
4.Press SELECT to accept any changes and deselect the parameter.
13163L Rev. 3 5/20/2004 | Z4Mplus/Z6Mplus User Guide | 67 |