Zebra Technologies Z6Mplus manual LCD Display Settings

Introduction

Front Panel

LCD Display Settings

Table 1 shows front panel LCD display settings that you may wish to adjust and what they mean. Refer to Basic Configuration on page 53 for more detailed information on each setting.

			Table 1 • Front Panel LCD Display Settings
LCD Display			Meaning/Available Settings
PRINTER		READY	Ready to print labels or to configure the printer. All printer self-
			tests have been performed successfully.
DARKNESS			The larger the number, the darker the print. The range is 0 to 30,
			with a default setting of 10.
PRINT	SPEED		The print speed is given in inches per second. The larger the
			number, the faster the label prints.
TEAR	OFF		Establishes the position of the media over the tear-off bar after
			printing.
PRINT	MODE		Tear-Off (default setting), Peel-Off, Cutter, Rewind. For more
			details, see Table 2.
MEDIA	TYPE		Non-continuous (default setting), Continuous
SENSOR		TYPE	Web (default setting), Mark
SENSOR		SELECT	Auto Select (default setting), Reflective, Transmissive
PRINT	METHOD		Thermal transfer (default setting using a ribbon),
			Direct thermal (no ribbon)

4 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004