MTD OEM-190-180A, 19A30002000 manual Assembling Remaining Bagger Components, Tabs Top View

3.Install the bagger hanger assembly onto the mounting assembly on the tractor by hooking it over the hitch plate between the two tabs. See Fig. 4-9.

Tabs

Top View

Figure 4-9

4.Secure the hanger assembly to the mounting assembly using a 5/16” bolt and flange nut provided. See Fig. 4-10.

Figure 4-10

Assembling Remaining Bagger Components

Now that the mounting brackets are assembled and are in place on the tractor, follow these steps to assemble the remaining bagger components.

1.Snap the plastic upper chute support in place by first clipping the side portion onto the bagger support rail with the edge of the snap feature aligned with the red line, as seen in Fig. 4-11.

2.Snap the front side of the chute support to the rail, as shown in the inset of Fig. 4-11.

2 1

Figure 4-11

12

Section 4 — Assembly & Installation