MTD 19A30002000, OEM-190-180A manual

Note: For the chute elbow to be properly installed, the bottom edge must fall over the bottom of the deck opening. See Fig. 4-22.

Figure 4-22

12.Secure the chute elbow to the tractor’s deck by hooking the chute strap onto the ball pin installed earlier on the deck. See Fig. 4-23.

Figure 4-23

13.Install the chute adapter onto the chute elbow by lining up the tabs and sliding the adapter over the chute elbow, as in Fig. 4-24. Secure the chute adapter by installing the two ratchet clips included in the hardware pack in the holes provided.

Figure 4-24

14.With the bagger cover open, install the upper chute over the chute adapter, and rest the top so that the chute support sits in the upper chute groove. See Fig. 4-25.

Note: Make sure to align the upper chute with the ridges on the bagger support bracket.

Figure 4-25

Section 4 — Assembly & Installation

15