3.Use slow speed. Choose a low enough speed setting so that you will not have to stop or shift while on the slope. Tires may lose traction on slopes even though the brakes are functioning properly. Always keep machine in gear when going down slopes to take advantage of engine braking action.
4.Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.
5.Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury.
6.Avoid starting or stopping on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope.
Do Not:
1.Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.
2.Do not mow near
3.Do not try to stabilize the machine by putting your foot on the ground.
4.Do not use a grass catcher on steep slopes.
5.Do not mow on wet grass. Reduced traction could cause sliding.
General Service
1.Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.
2.Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition.
3.Never tamper with your mower’s safety interlock system or other safety devices. Check their proper operation regularly.
4.Never attempt to make adjustments or repairs while the mower’s engine is running.
5.Grass catcher components and the discharge cover are subject to wear and damage which could expose moving parts or allow objects to be thrown. For safety protection, frequently check components and replace immediately with original equipment manufacturer’s (O.E.M.) parts only, listed in this manual. Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!
6.Maintain or replace safety and instruction labels, as necessary.
Safety Symbols
This table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.
Symbol | Description |
READ THE OPERATOR’S MANUAL(S)
Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate
STOP
Turn off the engine before opening the bagger cover.
Warning! Your
SAVE THESE INSTRUCTIONS!
Section 2 — Important Safe Operation Practices
5
