Multi-Tech Systems iCell GPRS (MTSMC-G2-IP manual #DIALSELECT Set Internet Connection Number

Part 4 – AT Commands for the SocketModem iCell, SocketModem IP, and MultiModem iCell Chapter 14

#DIALSELECT – Set Internet Connection Number

Description:	The value of this command determines the number called to establish an Internet connection. It
	configures the TCP/IP stack software to use the primary dial-up number or the secondary dial-up
	number.
Syntax:	AT#DIALSELECT=<value>
	AT#DIALSELECT? Read or display the current setting (or AT#VPHY, AT#VALL).
Values:	1	- se primary dial-up number.
	2	- Use secondary dial-up number
Default:	1

#ISPPW – Set ISP Password

Description: This parameter sets the password for the ISP account. When communication is initiated and once the physical (modem) connection has been established with the ISP, the TCP/IP stack software must provide the ISP with the password associated with the account to be used.

Syntax: AT#ISPPW="<value>"

AT#ISPPW? Read or display the current setting (or AT#VPPP, AT#VALL).

Values: Alpha-numeric ASCII text string up to 64 characters.

Default: None

#ISPUN – Set ISP User Name

Description: This parameter sets the user name of the ISP account. When communication is initiated and the physical (modem) connection has been established with the ISP, the TCP/IP stack software must provide the ISP with the user name associated with the account to be used.

Syntax: AT#ISPUN="<value>"

AT#ISPUN? Read or display the current setting (or AT#VPPP, AT#VALL).

Values: Alpha-numeric ASCII text string up to 64 characters.

Default: None

Universal IP AT Commands Reference Guide (Document S000457K) 80