Part 2 – AT Commands for the SocketEthernet IP Chapter 9 – Auto Discovery AT Commands for the SocketEthernet IP
Universal IP AT Commands Reference Guide (Document S000457K) 54
Chapt er 9 – Auto Discovery AT Commands for the SocketEthernet IP
A Note about Auto Discovery: Auto Discovery will broadcast information; however, at this time, the information
cannot be updated using the Auto Discovery Manager.
Set Commands

#AUTODISC – Auto Discovery On/Off

Description: This command turns Auto Discovery On or Off.
Syntax: AT#AUTODISC=<value>
AT#AUTODISC? Read or display the current setting (or AT#VAU TODISC, AT#VALL).
Values: 0 – OFF
1 – ON
Default: 1

#AUTODISCTIMER – Auto Discovery Timer

Description: This command sets the Auto Discovery timer.
Syntax: AT#AUTODISCTIMER=<value>
AT#AUTODISCTIMER? Read or display the current setting (or AT#VAUTODISC, AT#VALL).
Values: 0 to 60 seconds
Default: 10

#AUTODISCPORT – Auto Discovery Port

Description: This command sets the Auto Discovery port.
Syntax: AT#AUTODISCPORT=<value>
AT#AUTODISCPORT? Read or display the current setting (or AT# VAUTODISC, AT#VALL).
Values: 0 to 65535
Default: 1020

#AUTODISCHOST – Set Auto Discover Host Name

Description: This command sets the Host Name that will appear in the Auto Discovery Manager.
Syntax: AT#AUTODISCHOST ="<value>"
AT#AUTODISCHOST? Read or display the current setting (or AT# VAUTODISC or AT#VALL).
Values: Alphanumeric ASCII text string up to 120 characters.
Default: MT100SEM