MR9600 User Guide
Getting T1 Card Info ....
T1 Card Status:
Wink High Time (ms):220
After Wink Time (ms):500
PreWink Time (ms):220
Channel Polling Interval (Sec):0
Error Threshold:6
Disconnect Timeout (sec):11
Framing Format:DS1 AT&T Extended Super Frame (ESF)
Line Coding:Binary 8 Zero Substitution (B8ZS)
FXS Signaling Options:E&M Immediate Start
Transmit Level:- 0.0dB
Receive Level:+2.0db to
LED Information:Online
Version:1.08/1.06
type
See cat.
unloadmod
Parameter: Module Name
Description: Unloads a module into memory. If unloaded successfully, the module is no longer available to run.
Example:
[0]A:\MODULES # unloadmod nocall
Module <NOCALL> unloaded successfully
unmount
Parameter: Drive Specifier
Description: Remove the drive from the operating system. This is commonly done before formatting the drive.
Security: Supervisor
Example:
[01]A:\# unmount b:
[02]A:\ # format b:
[03]B:\ #
update
Parameter: Pathname Device
Description: Updates the firmware of the controller, of a T1 device, or of up to eight modems. Pathname is the path of the file used to update the firmware. The file name extension determines which device is updated: .HXC updates the controller; .HXT updates the T1 card; and .HEX updates modems.
Security: Operator
Limitations: Only one update can be performed at one time.
Example:
update hd8803t.hex 2b:2h Update started.
60 | CommPlete Communications Server |
