MR9600 User Guide
58 CommPlete Communications Server
10/30/1996 5:12pm
t1cfg
Parameter: Device
Description: Sends T1 configuration information stored in nonvolatile memory to the specified device.
The specified device must be a T1 device. T1 devices can exist only at 1b, 1c, 5b, 5c, 9b, 9c, 13b, and 13c.
Security: Operator
Example:
[0] A:\MMM # t1cfg 1b,5b,9b,13b
t1channelstatus, t1chstatus
Parameter: Device
Description: Displays the status of all the channels for the given T1 device.
Security: Guest
Example:
[0] A:\MMM # t1chstatus 13b
Channel CO Modem OOS Channel CO Modem OOS
1 On Hook On Hook 2 On Hook On Hook
3 On Hook On Hook 4 On Hook On Hook
5 On Hook On Hook 6 On Hook On Hook
7 On Hook On Hook 8 On Hook Timeout
9 On Hook On Hook 10 On Hook On Hook
11 On Hook On Hook 12 On Hook On Hook
13 On Hook On Hook 14 On Hook On Hook
15 On Hook On Hook 16 On Hook On Hook
17 On Hook On Hook 18 On Hook On Hook
19 On Hook On Hook 20 On Hook On Hook
21 On Hook On Hook 22 On Hook On Hook
23 On Hook On Hook 24 On Hook On Hook
CO - Central Office, * - Inconsistent State
t1debug
Parameter: Device
Description: Displays the status of AB Signalling bits for both the transmit and recei ve directions of each
DSO channel for the specified T1 device within the CommPlete. TX = from CommPlete T1 card to central
office. RX = from central office to CommPlete T1 card.
Security: Supervisor
Limitation: CC9600 only
Example:
[31] A:\ # t1debug 1b
1. Enable Signal Bit monitoring
2. Turn Off signal bit monitoring
3. Signal Poll interval (4)
=> 1
Completed enabling all selected devices!
[32] A:\ #
01B 01B
Tx/Rx Tx/Rx
AB/AB AB/AB