
Chapter - 2 Hardware Installation
Step 2 - Install the Modem into Your Computer
Installing the MultiModemZPX requires you to open your computer. Please consult your computer manual in addition to the following instructions:
1.Turn off the computer and unplug it. Failure to do so may result in damage to both the MultiModemZPX and the computer. Do not turn on the computer until the instructions tell you to do so.
2.Remove the cover from the computer as instructed in the computer manual.
3.Select an empty
4.Before handling the MT5634ZPX, discharge static in your body by touching a metal piece of the computer chassis. Carefully remove the MultiModemZPX from its antistatic bag, handling it only by the mounting bracket and edges. Do not touch the
5.Place the MultiModemZPX directly above the expansion slot and gently, but firmly, push it into the connector until the card’s retaining bracket is flush against the computer chassis.
6.Fasten the retaining bracket to the computer chassis with the screw saved in step 3.
7.Replace the cover of the computer.
Step 3 - Connect Your Modem to the Telephone Line
The MultiModemZPX communicates over
The MultiModemZPX offers a voice port which allows you to connect your adapter to a microphone and speaker. The microphone can be used for recording answering machine messages or for speakerphone use. The speaker can be used for playing back messages or as a speakerphone.
LINE
PHONE
MIC IN
LINE OUT
1. Plug one end of the supplied modular telephone cable into the LINE jack.
16 |