Chapter - 2 Hardware Installation

2.Plug the other end of the telephone cable into a working wall jack.

3.You may connect a telephone to the modem’s PHONE jack.

Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug a phone into the LINE jack or the line cable into the PHONE jack.

4.To use a microphone with your adapter, insert the microphone plug into the MIC IN jack.

5.To use a speaker or headphone with the modem, insert the speaker or headphone plug into the LINE OUT jack.

Sound Card Considerations

If you want speakerphone functions and the ability to record sound or .WAV files through the sound card at the same time, you need:

•Two stereo PC microphones

•One stereo male-to-male patch cord

•One sound card and optional speakers To connect a third party sound card:

1.Obtain a stereo male-to-male patch cord at a local PC retail store.

2.Place one end of the stereo male-to-male patch cord into the LINE OUT jack of the MultiModemZPX and the other end into the LINE IN jack of the sound card. This allows you to hear the activity of the modem whether it is originating or answering a call, or playing a recorded message.

3.Place the stereo microphones (do not use mono microphones) far enough apart from each other to eliminate feedback (e.g., one on each side of the monitor). Make sure speakers are amplified with a power source (either a battery or electrical source). Plug the connector of both microphones into the MIC IN jack of the Sound Card and the MT5634ZPX.

Multi-Tech Systems, Inc. MT5634ZPX User Guide

17