13
Configure Host MultiVOIP
Configuring Your Host MultiVOIP
Configuring your Host MultiVOIP involves software loading and
configuration.
The software loading procedure does not provide every screen
or option in the loading process. It is assumed that a technical
person with a thorough knowledge of Windows and the
software loading process is performing the installation.
Additional information on the MultiVOIP software is provided in
the User Guide supplied with your MultiVOIP.
If you are installing a MultiVOIP behind a firewall, you need to
add the following UDP ports to your firewall.
Q.931 Signaling, Ch1 [900] Q.931 Signaling, Ch2 [902]
Status [5000]
Ch1 RTP [5004] Ch1 RTCP [5005]
Ch2 RTP [5006] Ch2 RTCP [5007]
Refer to your firewall user documentation to enter and open
these ports.
1. Make certain that your MultiVOIP 200 has been properly
cabled and that the power is turned on.
2. Insert the MultiVOIP 200 CD into your CD-ROM drive. The
CD should start automatically. It may take 10 to 20
seconds for the MultiTech CD installation window to
display.