MultiVOIP Quick Start Guide
18
13. The Channel Setup dialog box displays. It is used to
define the voice/fax channel interface, voice coder, fax
parameters, billing options, security settings, and regional
phone parameters (tone pairs) for each channel.
Configure each channel for the type of interface you are
connecting to. To change the channel number, select the
channel you want to configure from the Select Channel
list.
14. The Interface group defaults to FXS (Loop Start). Select
the interface option to correspond to the interface type
being connected to the Voice/Fax connector on the back
panel of the MultiVOIP.
If you are connecting a station device such as an analog
telephone, a fax machine, or a Key Telephone System
(KTS) to the Voice/Fax connector on the back of the unit,
FXS (Loop Start) will likely be the correct Interface option
most of the time.
If the station device uses ground start, then choose the
FXS (Ground Start) option. Refer to the device’s user
documentation.
If you are using an extension from your PBX, then choose