Deploy VOIP Network
Repeat this procedure for each of the client units. When all clients have been configured, proceed with deploying the VOIP network.
Deploying the VOIP Network
Deploying the VOIP network involves the VOIP Administrator developing the VOIP Dialing Directory and deploying the pre- configured client MultiVOIPs to their remote sites. The remote site administrators need only connect power to the pre- configured MultiVOIP, connect it to their Ethernet LAN and predefined telephone equipment, and then wait for the phone directory database to be downloaded.
Perform the following procedure to deploy your VOIP network.
VOIP Administrator
1.Establish your VOIP Dialing Directory based on your Phone Directory Database for the numbers to connect the MultiVOIPs to your VOIP network and the telephone extension number you need to connect the Voice/Fax channels. A sample VOIP Dialing Directory is provided below for your consideration and use.
VOIP Dialing Directory
To call from | Call Process | Dialing |
|
| Sequence |
2. Send the client MultiVOIPs to their remote sites.
37
