39
Deploy VOIP Network
on the back of the MultiVOIP and the other end to the
trunk phone jack.
7. Repeat the above step to connect the remaining telephone
equipment to each Voice/Fax Channel on your MultiVOIP.
8. Turn on power to the MultiVOIP by placing the ON/OFF
switch on the back panel to the ON position. Wait for the
Boot LED on the MultiVOIP to go off before proceeding.
This may take a couple of minutes.
9. At this time your VOIP network should be fully operational.
Dial one of the sites in your network using the dialing
directory supplied by your Network Administrator.