Multi-Tech Systems RF102S

Software Installation

13.The Setup Wizard: Modem Setting dialog box re-

displays. Select the baudrate from the Asynchronous

port settings list. Select the DTE speed (the speed of

communication between the asynchronous port of the

RF102S and the modem). For DCE speed compression

modems, this can normally be set to about four times the

speed of your modem. If you set the baudrate too high, the

dial-up connection may fail.

Note: You may need to set a lower baudrate since the

modems maximum connection speed may not be

attainable due to variations in phone line quality and ISP

connection.

Click Next to complete the basic configuration.

14.The Check List dialog box displays, summarizing your

configuration selections. Verify that all selections are

correct. If you find an incorrect setting, click Back to return

to the window containing the error and correct it. When

finished, click Next to return to the Check List dialog box.

Click Finish to complete the configuration.