RouteFinder Quick Start Guide
22
15.The Note dialog box displays indicating that you have
completed the Setup Wizard.
Read the IMPORTANT! information contained in the dialog
box. Click Run Monitor (recommended), or click Run
Manager to configure the RF102S, or click Exit.
Testing your Connection
When you select Run Monitor, the RouteFinder Monitor
program opens.
1. To test your current settings, select Test Connection.
Select Connect Port 1 to test serial port 1. Select
Connect Port 2 to test serial port 2. The monitor activity
will appear in the display window. Refer to the RouteFinder
Monitor chapter in the User Guide for additional information
about the monitoring capabilities of the RF102S.
2. Before using the device, you must configure your
workstations for TCP/IP. Refer to the LAN Client Settings
chapter of the User Guide for configuration information.