Multiquip operation manual DCA-25SSIU2 50 HZ- OUTPUT TERMINAL PANEL CONNECTIONS

DCA-25SSIU2 (50 HZ)— OUTPUT TERMINAL PANEL CONNECTIONS

3Ø 440/254 Output Terminal Lug Voltages

1.Place the voltage selector switch in the 3Ø 480/277 position as shown in Figure 27.

1Ø 200V/100V Output Terminal Lug Voltages

1.Place the voltage selector switch in the 1Ø 240/120 position as shown in Figure 29.

Figure 27. Voltage Selector Switch 480/277V	Figure 29. Voltage Selector Switch 240/120V
Three-Phase Position	Single-Phase Position

2.Connect the load wires to the OutputTerminal Lugs as shown in Figure 28.

2.Connect the load wires to the OutputTerminal Lugs as shown in (Figure 30).

BLACK		RED	BLUE	WHITE GREEN
	U	V	W	O

440V 440V 254V

440V	GROUND CONNECTION
	MUST BE USED
	AT ALL TIMES
	254V
	254V

Figure 28. Output Terminal Lugs	Figure 30. Output Terminal Lugs
3Ø-440/254VThree Phase Connections	1Ø-200/100V Connections

3.Turn the voltage regulator knob (Figure 24) clockwise to increase voltage output, turn counterclockwise to decrease voltage output.

3.Turn the voltage regulator knob (Figure 24) clockwise to increase voltage output, turn counterclockwise to decrease voltage output.

DCA-25SSIU2 (50 HZ)— OPERATION AND PARTS MANUAL — REV. #0 (03/11/05) — PAGE 29