DCA10SPX4/DCA10SPXU4 — GENERATOR CONTROL PANEL

The definitions below describe the controls and functions of the Generator Control Panel (Figure 4).

1.Frequency Meter – Indicates the output frequency in hertz (Hz). Normally 50 Hz.

2.AC Ammeter – Indicates the amount of current the load is drawing from the generator.

3.AC Voltmeter – Indicates output voltage.

4.Engine Warning Display Module – This module displays the following engine failures:

A.Overheat Lamp – This lamp goes ON when the coolant is over 234oF. If the lamp goes ON during normal operation of the generator, the emergency shut-down device will stop the engine automatically.

B.Low Oil Pressure Lamp – During normal operation of the generator this lamp should remain OFF. After the oil pressure rises after start-up,

the lamp will go OFF. This lamp goes ON when the oil presure drops below 7.1 PSI.If this lamp is ever lit (ON) during normal operation of the generator, the emergency shut-down device will stop the engine automatically.

C.Low Battery Fluid Lamp – This lamp goes ON when the battery fluid is low. If this lamp goes ON during normal operation of the generator, stop the engine and fill the battery with distilled water to the specified level.

D.Pre-Heat Lamp – This lamp indicates when the engine is ready for starting during cold weather operating condition. When engine failures (this light flashes) occur, refer to the TROUBLESHOOTIG for a more detailed code.

5.Hour Meter – Indicates the number of hours machine has been in use.

6.Speed Control Switch –This switch controls the speed of the engine (idle/high).

Figure 4. Generator Control Panel

7.Ignition Switch – Insert ignition key into this switch to start engine.

8.Voltage Regulator Control – Allows ±15% manual adjustment of the generator’s output voltage.

9.Twist Lock Dual Voltage Receptacle (CS6369) – Provides 100/200 VAC output (45 amps max).

10.Auxillary Receptacle (for L6-30R) – Provides 200 VAC output (30 amps max).

11.Auxillary Receptacle (for L5-30R) – Provides 100 VAC output (30 amps max).

12.GFCI Receptacle – Provides 100 VAC output (20 amps max).

13.CS6369 Receptacle Circuit Breaker - This single-pole, 45A breaker is provided to protect the CS6369 receptacle from overload.

14.Ground Terminal - Ground Terminal for Output Receptacles.

15.Auxillary Receptacle Circuit Breaker - This single- pole, 30A breaker is provided to protect the auxillary receptacle (for L6-30R) from overload.

16.Auxillary Receptacle Circuit Breaker - This single- pole, 30A breaker is provided to protect the auxillary receptacle (for L5-30R) from overload.

17.GFCI Receptacle Circuit Breaker - This single-pole, 20A GFCI breaker is provided to protect the GFCI receptacle from overload.

18.Main Circuit Breaker – This three-pole, 45A main breaker is provided to protect the the generator from overload.

PAGE 20 — DCA10SPX4/DCA10SPXU4 — OPERATION AND PARTS MANUAL — REV. #0 (08/05/09)

Page 19 Page 21
Page 20
Image 20
Multiquip operation manual DCA10SPX4/DCA10SPXU4 Generator Control Panel
Page 19 Page 21

DCA10SPXU4, DCA10SPX4 specifications

The Multiquip DCA10SPX4 and DCA10SPXU4 are highly regarded portable diesel generators that cater to a wide range of applications, from construction sites to outdoor events. These models are part of Multiquip’s popular line of reliable power solutions, designed to deliver robust performance and versatility.

At the heart of both models lies a powerful and efficient Yanmar diesel engine. The DCA10SPX4 offers a rated output of 10 kVA, while the DCA10SPXU4 provides the same output, making both models suitable for powering tools, lights, and other equipment. The Yanmar engine is known for its efficiency, offering longer run times between refueling and lower operational costs, making these generators economical choices for users.

One of the standout features of the DCA10SPX4 and DCA10SPXU4 is their durability and rugged design. Constructed with a powder-coated steel frame, these generators can withstand harsh environments and heavy use. The enclosed design reduces noise levels, making them ideal for urban jobsites or residential areas where noise restrictions may apply. Additionally, the weather-resistant design enhances their usability in unfavorable weather conditions.

Both models come equipped with advanced monitoring features and controls that make operation straightforward. An easy-to-read digital display provides real-time information regarding output voltage, frequency, and engine performance. This allows operators to monitor their generator’s performance swiftly and efficiently, ensuring smooth operation throughout usage.

In terms of safety, the DCA10SPX4 and DCA10SPXU4 incorporate various protective mechanisms. They include an automatic shutdown feature that activates in the event of low oil pressure or overheating, protecting the engine from damage. Furthermore, the generators are equipped with overload protection to prevent equipment damage from excessive loads.

Another notable characteristic is the generator's portability. Both models feature a compact design, lightweight structure, and integrated lifting hooks, making them easy to transport and position on job sites. Their user-friendly design allows for quick setup and disassembly, ensuring minimal downtime for users.

Overall, the Multiquip DCA10SPX4 and DCA10SPXU4 generators combine efficiency, durability, and user convenience, making them an outstanding choice for professionals seeking dependable power solutions in various applications. Whether powering construction tools or supporting outdoor events, these generators deliver reliable performance tailored to meet diverse energy needs.
Top Page Image Contents