Engine Operating Panel

COOLANT LEVEL

Figure 5. Engine Operating Panel

The deﬁ nitions below describe the controls and functions of the DCA800SSK2 Engine Operating Panel (Figure 5).

1.Battery Switch — This switch should be set to the ON position during normal operation.When the engine has been stop, place this switch in the OFF position. DO NOT turn this switch during normal operation, it could cause damage to the electrical equipment.

2.Engine Speed Switch — This switch controls the speed of the engine (low/high).

3.PreHeat Lamp — When ECU is placed in AUX position, preheat lamp will be ON. When preheat cycle is completed, lamp will turn OFF.

4.PreHeat Button — Push this button when the engine is ready for starting during cold weather operating conditions. Keep pushing until the preheat lamp is off.

5.Emergency Stop Button — Push this button inward to stop the engine in the event of an emergency. DO NOT use this button as a means of stopping the engine.

6.Tachometer — Indicates engine speed in RPM’s for 60 Hz operation. This meter should indicate 1800 RPM’s when the rated load is applied. In addition a built in hour meter will record the number of operational hours that the generator has been in use.

7.Oil Pressure Gauge — During normal operation this gauge be should read between 28 to 85 psi. (193~586 kPa). When starting the generator the oil pressure may read a little higher, but after the engine warms up the oil pressure should return to the correct pressure range.

8.Water Temperature Gauge — During normal operation this gauge be should read between 167° and 203°F (75°~95°C).

9.Charging Ammeter Gauge — Indicates the current being supplied by the engine’s alternator which provides current for generator’s control circuits and battery charging system.

10.Fuel Gauge — Indicates amount of diesel fuel available.

11.Engine Warning Lamps — There are six engine warning lamps, they are deﬁ ned as follows:

a.Overheat Lamp — This lamp goes ON when the cooling water temperature rises abnormally. If the lamp goes ON during normal operation of the generator, the emergency shutdown device will stop the engine automatically.

b.Low Oil Pressure Lamp — During normal operation of the generator this lamp should remain OFF. When the AutoOFF/ResetManual switch is set to the MANUAL position to start the engine, the lamp will be lit. When the oil pressure

rises after startup the lamp will go OFF. If this lamp is ever lit (ON) during normal operation of the generator, the emergency shutdown device will stop the engine automatically.

c.Low Fuel Level Lamp — When this lamp is ON, it is time to stop the engine and add fuel. Remember to let the engine cool before adding fuel.

d.Air Filter Alarm — When the air ﬁ lter

element is clogged, this lamp goes ON indicating the element should be immediately cleaned or replaced.

e. Oil Filter Alarm — This lamp goes ON when the coolant level is low. If this lamp goes ON while the engine is in operation, the emergency shutdown device will automatically stop the engine.

f.Water Level Lamp — This lamp goes ON when the coolant level is low. If this lamp goes ON while the engine is in operation, the emergency shutdown device will automatically stop the engine.

PAGE 20 — DCA800SSK2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #0 (09/03/09)

DCA800SSK2 specifications

The Multiquip DCA800SSK2 is a robust and versatile portable diesel generator, designed to meet the demands of a wide range of applications. With a powerful 800 kW (kilowatt) capacity, it is particularly suited for use in construction sites, events, and emergency backup power situations. This generator combines reliability, durability, and ease of use, making it a popular choice among contractors and rental companies.

One of the main features of the DCA800SSK2 is its advanced sound attenuation technology. This ensures that the generator operates quietly, minimizing noise pollution while maximizing performance. The enclosure is designed to reduce sound levels without compromising on the cooling requirements, which extends the overall lifespan of the generator. Users can expect noise levels well within acceptable limits for urban and residential areas.

The DCA800SSK2 is equipped with a state-of-the-art digital controller that offers enhanced monitoring and diagnostic capabilities. This intelligent control system enables users to track key performance metrics, such as voltage, frequency, and operating hours, all from a user-friendly interface. Furthermore, it includes automatic shutdown features for low oil pressure, high temperature, and overcurrent situations, providing an added layer of safety and preventing potential damage.

Fuel efficiency is another standout characteristic of the Multiquip DCA800SSK2. With a large fuel tank, it can operate for extended periods without frequent refueling, making it ideal for long-term use in remote areas where access to fuel may be limited. The generator's engine is engineered to provide optimal fuel consumption, ensuring that operators can maximize their running time while minimizing operational costs.

The DCA800SSK2 includes multiple outlets for electricity distribution, allowing users to connect various tools and equipment simultaneously. This versatility makes it suitable for a wide range of applications, from powering heavy machinery on construction sites to providing backup power for critical infrastructure.

Overall, the Multiquip DCA800SSK2 stands out in the market for its combination of power, efficiency, and advanced features. With its robust build quality, innovative technologies, and user-centric design, it is an excellent choice for anyone in need of a reliable portable generator. Whether for professional use or emergency situations, the DCA800SSK2 delivers outstanding performance and peace of mind.

Multiquip DCA800SSK2 manual Engine Operating Panel, Air Filter Alarm When the air ﬁ lter

Models: DCA800SSK2