Multiquip GBP, GBS, GBW Operation, Raising The Mast Gbw/Gbwe, Lowering The Mast Gbw/Gbwe, Danger

OPERATION

RAISING THE MAST (GBW/GBWE)

DANGER

ALWAYS make sure the area above the lighting system is open and clear of overhead power lines and other obstructions. Contact with overhead power lines or other obstructions could result in equipment damage, electrical

shock, electrocution and even death.

CAUTION

When raising or lowering the mast, keep hands and

fingers clear of the mast sections to prevent hand and

fingers from getting pinched.

1.Raise the second mast to the desired height and tighten the T-bolt securely. See Figure 23.

SECOND

MAST

T-BOLT

Figure 23. Raising the Second Mast

2.To raise the mast higher, raise the third mast until the lock/release tab pops out. The tab will automatically rest on the second mast. See Figure 24.

THIRD

MAST LOCK/

RELEASE

TAB

Figure 24. Raising the Third Mast

LOWERING THE MAST (GBW/GBWE)

1.Loosen the T-bolt holding the second mast and push mast all the way down. Tighten T-bolt securely. See Figure 25.

SECOND

MAST

T-BOLT

Figure 25. Lowering Second Mast

2.Push the lock/release tab on the third mast to release it and lower third mast. See Figure 26.

LOCK/

THIRD RELEASE

MAST TAB

Figure 26. Lowering Third Mast

GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09) — PAGE 23