MAINTENANCE
FILTER REPLACEMENT
1.Remove the balloon as described in the STORAGE section.
2.Turn the balloon/lamp assembly upsidedown to access the fi lter. See Figure 44.
5.Install a new fi lter and reinstall the air plate.
6.Turn the three locking tabs inwards to lock the air plate in place. See Figure 46.
LOCK TAB
AIR PLATE 
LOCKING
TAB
Figure 46. Locking Air Plate
Figure 44. Accessing Filter
3.Turn the three locking tabs outwards to release the air plate. See Figure 44.
4.Remove the air plate and fi lter. See Figure 45.
AIR PLATE
FILTER 
Figure 45. Filter Removal
PAGE 28 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)
