SAFETY MESSAGE ALERT SYMBOLS
FOR YOUR SAFETY AND THE SAFETY OF OTHERS!
Safety precautions should be followed at all times when operating this equipment. Failure to read, understand and comply with the Safety Messages and Operating Instructions could result in injury to yourself and others.
This Operation Manual has been developed to provide instructions for the safe and efficient operation of the MQ PS4030 Saw . For engine maintenance information, please refer to the engine manufacturer's instructions for data relative to its safe operation.
Before using this Saw, ensure that the operating individual has read, understands, and complies with all instructions in this manual.
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.
HAZARD SYMBOLS
Lethal Exhaust Gases
Engine exhaust gases contain harmful toxins and will displace oxygen when running in an enclosed or confined area. NEVER operate this equipment in a confined area or enclosed structure that does not provide ample free flow air.
Explosive Fuel
Diesel fuel is flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids. DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in approved containers, in
DANGER
You WILL be KILLED or SERIOUSLY INJURED if you DO NOT follow these directions.
WARNING
You CAN be KILLED or SERIOUSLY INJURED if you DO NOT follow these directions.
CAUTION
You CAN be INJURED if you DO NOT follow these directions.
Potential hazards associated with Saw operation will be referenced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunction with Safety Message Alert Symbols.
Burn Hazards
Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operations. NEVER operate the engine with heat shields or heat guards removed.
Rotating Parts
NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.
Skin Injection Hazard
NEVER use your hand to find hydraulic leaks. Use a piece of wood or cardboard. Hydraulic fluid injected into the skin must be treated by a knowledgable physician immediately or severe injury or death can occur.
PAGE 10 — MQ PS4030 SAW • OPERATION MANUAL — REV. #0 (02/29/08)
