MQ PS4030 SAW — MAINTENANCE
Never blow dirt out with compressed air or try to clean with fluids. Damage can occur to the filter, and if
CAUTION
Safety Air Filters are NOT intended to be used for primary air filtration. When the Primary Air Filter becomes clogged, replace it immediately. DO NOT run the saw using the Safety Filter only.
Replace the Safety Filter element every fourth Primary Filter element. See Table 8, Air and Oil Filter Chart for part numbers.
Table 8. Air and Oil Filter Chart
FILTER | PART NUMBER |
|
|
Primary Air Filter | P772579 |
Safety Air Filter | P775300 |
Engine Oil Filter | 306012 (Deutz |
Hydraulic System Filter | 306006 |
Fuel Filter | 304010 (Donaldson #1174696) |
1
Engine
This saw features a 30 HP DEUTZ Tier II diesel engine, F2L2011. Complete engine service details and recommendations can be found in the engine manufacturer's manual included with the saw.
2
19
18
17
15 | 4 |
16
2 | 1 | 6 | 5 |
3 |
| ||
|
|
1
14
4
3
7 | 11 |
1. Air Cleaner Case | 5 |
|
2. Primary Filter Element
3.Safety Filter Element
4. Latch
5. Dust Discharge Valve
Figure 38. Air Cleaner Components
CAUTION
Operating the engine with loose or damaged air cleaner components could allow unfiltered air into the engine causing premature wear and failure.
13
9
6
10
8
12
PAGE 40 — MQ PS4030 SAW • OPERATION MANUAL — REV. #0 (02/29/08)
