Multiquip PS403030 MQ PS4030 SAW Intended USE / Familiarization, Intended Use, Engine, Features

MQ PS4030 SAW — INTENDED USE / FAMILIARIZATION

Intended Use

Operate the MQ PS4030 SAW, tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. The risk of such use lies entirely with the user. The manufacturer cannot be held liable for damages as a result of misuse.

This saw is not intended for dry cutting.

Engine

TheMQPS4030sawisclassifiedintheindustryasa"high"powered saw. This classification is particularly useful when selecting the proper cutting tool (blade) for an application.

The MQ PS4030 saw is powered by a liquid cooled, 2 cylinder diesel engine rated at 30 HP (22.37 kW) at 3,000 RPM. Blade rotation is belt driven. Wheel Drive system is driven by a hydrostatic transmission consisting of a variable displacement pump and two fixed displacement wheel motors.

Refer to the Engine Owner's Manual for specific instructions regarding engine operation and maintenance practices.

Water System

All MQ PS4030 saws provide a hardy water plumbing system that evenly distributes water volume and optimum flow rate to both sides of the blade to keep it cool when cutting. The basic water system provides a valve that connects to a standard garden hose. The water is delivered (via a hose) to the saw blade.

All MQ PS4030 saws are designed, engineered and manufactured with strict adherence to American National Standards Institute, Inc. (ANSI) guidelines B7.1 and B7.5.

Features

■Tri-Position handlebars allow for 3-position adjustment for optimal maneuverability.

■Engine Stop Switch conveniently located on Operators Control Panel.

■Console mounted with Vibration Control System.

■Chassis cold-formed welded box construction.

■Oil lubricated Blade Shaft Bearings - no lubrication requirements.

■Oil Bath design, fully enclosed cast iron housing.

■Quick Disconnect Blade Flange system; inner flanges mounted to shaft.

■Blade mounting Left side or Right side.

■Saw position guide helps ensure straight cuts

■Dual water lines directly deliver water to blade.

■Slip-On, tapered mount Blade Guard for ease of removal and installation.

■Blade Raise-Lower by electro-hydraulic pump.

■Belt Drive tension automatically controlled by hydraulic tensioning system.

■Dual Filter Element Air Filter with integral turbo pre-cleaner.

■Hydro-gear hydrostatic transmission pump.

■Hydro-gear hydrostatic wheel motors.

■Travel Speed up to 84 MPM (meters per minute)/ 275 FPM.

■Automatic actuating parking brake.

■Easy-Adjust electronically controlled depth stop.

■Optional Night Light.

MQ PS4030 SAW • OPERATION MANUAL — REV. #0 (02/29/08) — PAGE 17