PS7060 MULTIQUIP SAW — INSTALLING THE BLADE

Installing the Blade

The blade can be mounted on either side of the saw to accomodate different cutting jobs. With the proper sized blade selected, install the new blade referring to the following procedure.

Ensuretheflangefacesarekeptcleanandsmooth as well as the inside diameter of the Blade Shaft.

1. Raise the saw so the blade will clear the ground when installed.

2. Remove the blade flange bolt. This bolt is LEFT-HAND thread on the RIGHT side of the saw and RIGHT-HAND thread on the LEFT side of the saw.

3.Verify the blade flanges are clean and not damaged. Pay particular attention to all holes and recesses. Clean or "rod- out" as necessary (Figure 10.)

Figure 11. Aligning Flange Pin Through Blade

WARNING

Failure to properly tighten the Blade Mounting Bolt can result in the bolts coming loose with the Blade Flange potentially falling off the rotating Blade Shaft Assembly. The Blade and other parts coming loose from the saw during operation pose a high risk of serious injury or even death!

5.With the Blade still off the ground, tighten mounting bolt as tight as can be achieved until blade spins. (Item B, Figure 12 shows tightening direction for blade mounted on RIGHT side of saw.)

Figure 10. Inspect and Clean Flange

(Flanges from Waterjet System Shown)

3. Taking note of the direction of rotation of the blade, (Item A, Figure 12) insert the bushing and mounting bolt through the outer flange and blade. (See Figure 11.)

4.Align flange pin through the blade into the inner flange.

The Blade Mounting Bolt on the right side of the saw (as viewed from the operator's position), has a Left-handthread, while the bolt on the left side of the saw has a Right-handthread.

B

A

A.Blade Direction of Rotation

B.Tightening Direction - Right Side

Figure 12. Blade Rotation Direction

PAGE 26 — PS7060 MULTIQUIP SAW • OPERATION MANUAL — REV. #2 (06/02/08)

Page 26
Image 26
Multiquip PS706036 PS7060 Multiquip SAW Installing the Blade, Align flange pin through the blade into the inner flange

PS706020, PS706036, PS706026 PS706030, PS706016 specifications

The Multiquip PS706026, PS706030, PS706036, and PS706020 are highly regarded in the world of portable generators, designed to offer optimum performance and reliability for various applications. These models showcase a blend of advanced technologies and user-friendly features, catering to both professional and residential needs.

One of the standout features of the Multiquip PS706 series is their robust and efficient engines, which deliver reliable power output. These generators are equipped with a powerful Honda engine, ensuring superior performance even in demanding conditions. The engines are designed to be fuel-efficient, allowing users to save on fuel costs while maximizing operational time.

Another significant aspect of the PS706 series is their electric start capability. This feature offers added convenience, enabling users to start the generator at the push of a button. Additionally, the generators are equipped with a recoil backup starter, ensuring that users have a reliable starting method in the event of an electrical failure.

The generators are built with a heavy-duty frame and are designed to withstand tough job site conditions. Their compact and portable design allows for easy transportation, making them an excellent choice for contractors, construction sites, and recreational use. The inclusion of rugged wheels and a comfortable handle ensures that moving the generator is hassle-free.

Moreover, the PS706 series showcases impressive noise-reduction technology. With a well-designed muffler system, these generators operate quietly, making them suitable for use in residential areas and during outdoor events where noise restrictions may apply.

Safety features are also paramount in the Multiquip PS706 series. They are equipped with circuit breakers to prevent overload and automatic low-oil shutdown to protect the engine from damage. This focus on safety ensures that users can operate the generators with peace of mind.

The PS706 series generators have multiple outlet options, providing versatility in power supply. Users can charge multiple devices simultaneously, thanks to the inclusion of 120V/240V receptacles and GFCI-protected outlets.

In summary, the Multiquip PS706026, PS706030, PS706036, and PS706020 generators are engineered with high-performance engines, easy starting options, and advanced safety features. Their durability, portability, and noise-reduction capabilities make them suitable for a wide range of applications, from construction to home backup power. With these models, users can expect reliable and efficient performance even in the most demanding environments.