PS7060 MULTIQUIP SAW — TROUBLESHOOTING

TABLE 13. BLADE TROUBLESHOOTING

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

 

 

 

 

Blade too hard for the material being

Consult Dealer or Multiquip for correct blade. Try cutting

 

very soft material (sandstone, silica brick, cinder block) to

 

cut?

 

"Redress" the blade.

 

 

 

 

 

 

Engine torque diminished because of

Re-tension belts or replace.

 

loose or worn drive-belts?

 

 

Blade slows or stops cutting.

 

 

Insufficient engine power?

Check throttle setting. Refer to Engine troubleshooting.

 

 

 

 

 

Improper direction of rotation?

Check that the blade is properly oriented and rotational

 

arrow points in a "Down-Cutting" direction.

 

 

 

 

 

 

Blade is slipping on the blade shaft?

Check that the blade & flange pin are properly installed on

 

the blade shaft.

 

 

 

 

 

 

Blade misaligned on saw?

Check alignment integrity.

 

 

 

 

"Cut Gap" excessive or blade wobble?

Check blade shaft and flange for wear, damage and blade

 

seating.

 

 

 

 

 

 

Blade is excessively hard for the

Check specification of the blade with the material being

 

material being cut?

cut. Consult Dealer or Multiquip for information.

Blade does not cut straight

 

 

 

Ensure blade surface feet per minute speed (SFPM) is

and/or true.

Blade being used at improper RPM?

 

approximately 10,000.

 

 

 

 

 

 

Blade improperly mounted on arbor

Ensure blade is properly affixed on the blade shaft.

 

shoulders and flanges?

 

 

 

 

 

 

Excessive force applied to blade while

DO NOT force the blade in the cut. Apply a slow and

 

cutting?

steady pace when sawing.

 

 

 

 

Blade wearing out on one side and

Check blade shaft and flange for wear, damage and blade

 

not the other?

seating.

 

 

 

 

Blades too hard for the material being

Consult Dealer or Multiquip for correct blade. Try cutting

 

very soft material (sandstone, silica brick, cinder block) to

 

cut?

 

"Redress" the blade.

 

 

 

 

 

 

Blade improperly mounted on arbor

Ensure blade is properly affixed on the blade shaft.

 

shoulders and flanges?

 

 

Blade discoloring, crackling

 

 

Blade not receiving enough cooling

Ensure proper flow & volume of water is provided for wet

and/or wearing excessively.

water?

cutting blades.

 

 

 

 

Arbor hole out of round?

Ensure blade is properly affixed on the blade shaft.

 

 

 

 

Incorrect blade chosen for material

Check specification of the blade with the material being

 

being cut?

cut. Consult Dealer or Multiquip for information.

 

 

 

 

Excessive force applied to blade while

Diamond abrasive material worn away or burnished into

 

the metal. Check saw for alignment or damage and

 

cutting?

 

replace saw blade.

 

 

 

 

 

PAGE 58 — PS7060 MULTIQUIP SAW • OPERATION MANUAL — REV. #2 (06/02/08)

Page 58
Image 58
Multiquip PS706036, PS706026 PS706030, PS706020, PS706016 PS7060 Multiquip SAW Troubleshooting, Blade Troubleshooting

PS706020, PS706036, PS706026 PS706030, PS706016 specifications

The Multiquip PS706026, PS706030, PS706036, and PS706020 are highly regarded in the world of portable generators, designed to offer optimum performance and reliability for various applications. These models showcase a blend of advanced technologies and user-friendly features, catering to both professional and residential needs.

One of the standout features of the Multiquip PS706 series is their robust and efficient engines, which deliver reliable power output. These generators are equipped with a powerful Honda engine, ensuring superior performance even in demanding conditions. The engines are designed to be fuel-efficient, allowing users to save on fuel costs while maximizing operational time.

Another significant aspect of the PS706 series is their electric start capability. This feature offers added convenience, enabling users to start the generator at the push of a button. Additionally, the generators are equipped with a recoil backup starter, ensuring that users have a reliable starting method in the event of an electrical failure.

The generators are built with a heavy-duty frame and are designed to withstand tough job site conditions. Their compact and portable design allows for easy transportation, making them an excellent choice for contractors, construction sites, and recreational use. The inclusion of rugged wheels and a comfortable handle ensures that moving the generator is hassle-free.

Moreover, the PS706 series showcases impressive noise-reduction technology. With a well-designed muffler system, these generators operate quietly, making them suitable for use in residential areas and during outdoor events where noise restrictions may apply.

Safety features are also paramount in the Multiquip PS706 series. They are equipped with circuit breakers to prevent overload and automatic low-oil shutdown to protect the engine from damage. This focus on safety ensures that users can operate the generators with peace of mind.

The PS706 series generators have multiple outlet options, providing versatility in power supply. Users can charge multiple devices simultaneously, thanks to the inclusion of 120V/240V receptacles and GFCI-protected outlets.

In summary, the Multiquip PS706026, PS706030, PS706036, and PS706020 generators are engineered with high-performance engines, easy starting options, and advanced safety features. Their durability, portability, and noise-reduction capabilities make them suitable for a wide range of applications, from construction to home backup power. With these models, users can expect reliable and efficient performance even in the most demanding environments.