RX 1510-C/-I/-CI
– 83 –
Only original RAMMAX spare hydraulic line lines offer the security of using the
correct line type (pressure stage) in the right situation.
• Check the tightness of all connections and screw connections after accomplishing
any type of work (on a pressure-free system!!).
• Hydraulic lines may not be swapped.
• Hydraulic lines must be visually checked regularly.
• Immediate replacement of the hydraulic hoses is necessary in the following
cases:
– Damages to the outer layer up to the inset. (e.g. chafing, cuts).
– Embrittlement of the outer layer (cracked formation on the line material).
– Deformation in pressureless or pressurised condition which does not
correspond with the original shape of the hydraulic line.
– Deformation on bending, e.g. crushing points, kinks, separation of plies,
formation of blisters.
– Leaking parts.
– Incorrectly executed installation.
– Migration of the hydraulic line from the fitting.
– Corrosion of the fitting, which reduces function and stability.
– Damage to or deformation of the fitting, which reduces the function and stability
or the connection line/line.
Maintaining the machine