RX 1510-C/-I/-CI
– 79 –
50% max.
7.4 Loading the machine with hoisting gear
The transport protection must be applied before loading with hoisting gear. Only
hoisting gear with a carrying capacity of at least 2000 kg may be used to load the
machine. The machine may only be lifted at the intended transport eyebolts.
1) Attach transport protection.
2) Apply the hoisting gear to the transport eyebolts of the machine.
3) Hook in the crane hook.
4) Lift the machine.
Rammax GmbH does not assume responsibility for damages, which result
from the use of hoisting gear, which does not correspond to the specified
requirements.
Death by crushing!
Items can come loose and falls down!
Do not walk or stand under suspended loads. Do not leave any loose items on the
machine.
Danger
7.3. Loading the machine with ramps
The machine can be loaded by driving over a suitable ramp. Do not thereby
exceed the maximum climbing ability of the machine.
5) Loaded and setting the machine down.
Loading and transporting the machine