RX 1510-C/-I/-CI
– 68 –
FH 4020
NOTE
The ignition start switch has a starter anti-repeat function. The starter is not
activated anymore, if the engine is running.
► At the most 15 seconds continuous starting and in between breaks of approx.
1 minute.
► Identify and repair cause of malfunction (malfunction table), if the engine
should not start.
Code „FH 4020” lights up: The motor has started.
► Release „Start” key. Code: Code „F H-00” lights up: The machine waits for
manual control commands and is ready for use.
NOTE
The infrared control does not recognize the neutral position, if the toggle switch
is moved directly from the switch position "Stop" to the switch position "Start".
The engine is not started.
► Always first move the toggle switch to the to neutral position
5.3.5 Starting the machine with the infrared control.
► Push the "Start switch" on the infrared control to the neutral position.
► Move the "Start switch" on the "Start" position and hold down. The following
code is displayed: „F I 4010”. The LEDS for generator and oil pressure drop
extinguish. The starter is active, as long as the "Start switch" is pressed.
Start-up