Multiquip RX 1510-C/-I/-CI - page 80

RX 1510-C/-I/-CI
– 80 –
UK
SS
TÖ TÖ
UK
SB
1) Check whether the transport protection is applied. ► If not, apply the transport
protection.
2) Check whether the shutdown yoke is in the transport position (activated). ► If
the shutdown yoke is not in the transport position, then press it downwards to the
chassis of the machine and secure it with the retaining band SB .
3) Put the chock blocks UK on both sides of the machine centrically under the drums.
7.5 Securing the machine for transport
► The chock blocks must be aligned opposite to each other, since the machine
could otherwise move in one direction.
4) Hook the shackles into the transport Seyebolts TÖ of the machine and eyebolts
of the transport vehicle; tighten the machine symmetrical crosswise on the
transport platform.
5) Check the load safeguard equipment again before transport.
6) Remove all loose items from the load and transport platform. ► Loose items can
fall off the vehicle when driving and endanger others.
Transport position
Loading and transporting the machine