Multiquip T16 operation manual Cleaning, Frost warning, Wheel, Tyres

3a

2a

1a

3a

GENERAL LAYOUT

1.Cleaning

If necessary, clean water tank (1a), filter (2a) and sprinkler tubes (3a) front and rear.

Frost warning

In the event of frost warning completely empty sprinkling system and take the screen filter (2a) out of the filter housing.

1.Take off filter housing.

2.Drain water

3.Switch sprinkler system on to drain remaining water from the tubes.

SCRAPERS

1 Wheel

Lightly tighten scraper for the roller by hand.

2 Tyres

Fill scraper for the tyres with a clearance of 3-5mm.

The toolbox is located on the R.H. side, close to the articulation joint. The toolbox of the K-Version is located under the engine hood.The tank for the tire lubrication is located on the right side, close to the articulation joint.

Before opening the toolbox always first put the articulation lock in place.

PAGE 16 — TANDEM ROLLER: T16 — PARTS & OPERATION MANUAL — REV. #2 (03/12/01)