Multiquip operation manual TLG-12SPX4- GENERATOR SHUT-DOWNPROCEDURES, Normal Shutdown Procedure

TLG-12SPX4 — GENERATOR SHUT-DOWN PROCEDURES

WARNING - SHUTTING DOWNTHE GENERATOR

NEVER stop the engine suddenly except in an emergency.

Normal Shutdown Procedure

To shutdown the generator use the following procedure:

1.Place both the main circuit breaker (Figure 31) to the OFF position.

Figure 31. Main Circuit Breaker (OFF)

2.Let the engine cool for 3-5 minutes with no load applied.

3.Turn the ignition key counter-clockwise to the STOP position. When the engine has stopped, remove key. Place key in a safe place where it will not be lost.

4.Inspect entire generator for any damage or loosening of components that may have occured during operation.

Emergency Shutdown Procedure

1.Turn the ignition key counter-clockwise to the STOP position. When the engine has stopped, remove key. Place key in a safe place where it will not be lost.

2.Place both the main circuit breaker as shown in (Figure 31) to the OFF position.

3.After an automatic system shutdown, always find and eliminate the problem before restarting generator.

TLG-12SPX4— OPERATION AND PARTS MANUAL — REV. #1 (12/17/09) — PAGE 31