safety information

ToWing SaFeTY

CauTion

„Check with your local county or state safety towing regulations, in addition to meeting Department of

Transportation (DOT) Safety Towing Regulations, before towing your mixer.

„In order to reduce the possibility of an accident while transporting the mixer on public roads, alWaYS make sure the towing vehicle is mechanically sound and in good operating condition.

„alWaYS shutdown engine before transporting.

„alWaYS inspect the hitch and coupling for wear. never tow a mixer with defective hitches, couplings, chains, etc.

„Check the tire air pressure on both towing vehicle and mixer Mixer tires should be inflated to 50 psi cold. Also check the tire tread wear on the vehicle and mixer.

„alWaYS make sure the mixer is equipped with a safety chain.

„alWaYS properly attach mixer’s safety chains to towing vehicle.

„The maximum speed for highway towing is 55 MpH unless posted otherwise. Recommended off-road towing is not to exceed 15 MpH or less depending on type of terrain.

„Avoid sudden stops and starts.This can cause skidding, or jack-knifi ng. Smooth, gradual starts and stops will improve towing.

„Avoid sharp turns to prevent rolling.

„Mixer should be adjusted to a level position at all times when towing.

„Raise and lock mixer wheel stand in up position when towing.

„Place chock blocks underneath wheel to prevent rolling while parked.

environMenTal SaFeTY

NOTICE

„Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel fi lters.

„do noT use food or plastic containers to dispose of hazardous waste.

„do noT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.

page 10 — WM70SH5C/wm70sh8c Mixer • operation and parts manual — rev. #0 (06/07/11)

Page 9 Page 11
Page 10
Image 10
Multiquip WM70SH5C, WM70SH8C manual ToWing SaFeTY, EnvironMenTal SaFeTY, „ alWaYS shutdown engine before transporting
Page 9 Page 11

WM70SH8C, WM70SH5C specifications

The Multiquip WM70SH5C and WM70SH8C are cutting-edge water pump models designed for construction and industrial applications. These robust machines are specifically engineered to handle a variety of heavy-duty pumping tasks, making them an essential asset for contractors and industrial operators alike.

The WM70SH5C model is powered by a reliable 5.5 HP Honda engine, while the WM70SH8C variant features an 8 HP Honda engine, providing additional power for demanding applications. Both models are equipped with a high-performance centrifugal pump, ensuring efficient water transfer and quick operation. They are capable of moving large volumes of water, making them suitable for dewatering, irrigation, and other water management tasks.

One of the standout features of the WM70SH series is their impressive maximum flow rate. The pumps can deliver up to 2,000 gallons per minute, significantly reducing the time required for water removal in flooded areas or construction sites. This efficiency is crucial in maintaining project timelines and ensuring safety in work environments.

Durability is another key characteristic of these models. The WM70SH5C and WM70SH8C are built with heavy-duty materials, including a cast iron pump housing and aluminum alloy components, which resist corrosion and ensure a long operational lifespan. Additionally, their rugged construction allows them to withstand harsh working conditions, making them reliable even in the toughest environments.

Ease of use and maintenance is also a priority in the design of these pumps. The WM70SH series features an easy-access maintenance panel that simplifies routine checks and service procedures. The equipped oil alert system helps prevent engine damage by shutting down the engine if the oil level is too low, providing peace of mind for operators.

Both models are designed for portability, with integrated handles and a lightweight frame that facilitate easy transportation. This mobility makes the WM70SH series ideal for contractors who need to move equipment frequently from one job site to another.

In summary, the Multiquip WM70SH5C and WM70SH8C water pumps stand out in the market for their powerful performance, robust construction, and ease of use. They are designed to deliver efficiency, reliability, and durability, making them an excellent choice for any water pumping requirements in construction and industrial applications. With features catering to the demands of heavy-duty tasks, these pumps enhance productivity while ensuring operational safety.
Top Page Image Contents