DANGEROUS
GAS FUMES

safety information

Mixer SaFeTY

danger

„never operate the equipment in an explosive atmosphere or near combustible materials.An explosion or fi re could result causing severe bodily harm or even death.

„do noT mix flammable or explosive substances.

Warning

„ never place your hands inside the drum while starting or operating this equipment.

„ never disconnect any emergency or safety devices. These devices are

intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.

„Before operating mixer, ensure that safety grate is in position and correctly fi tted.

CauTion

„never lubricate components or attempt service on a running machine.

NOTICE

„alWaYS keep the machine in proper running condition.

„alWaYS ensure mixer is on level ground before mixing.

„Fix damage to machine and replace any broken parts immediately.

„do noT tip mixer onto drum mouth when the drum is rotating.

„Ensure the drum is rotating while fi lling and emptying the drum.

„alWaYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

engine SaFeTY (gaSoline ModelS onlY)

danger

„Engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled.

„The engine of this equipment requires an adequate

free fl ow of cooling air. never operate this equipment in any enclosed or narrow

area where free fl ow of the air is restricted. If the air

fl ow is restricted it will cause injury to people and property

and serious damage to the equipment or engine.

Warning

„do noT place hands or fingers inside engine compartment when engine is running.

„never operate the engine with heat shields or guards removed.

„Keep fi ngers, hands hair and clothing away

from all moving parts to prevent injury.

„do noT remove the engine oil drain plug

while the engine is hot. Hot oil will gush out of the oil tank and severely scald any persons in the general area of the mixer.

CauTion

„never touch the hot exhaust manifold, muffl er or cylinder. Allow these parts to cool

before servicing equipment.

„Make certain the operator knows how to and is capable of turning the engine OFF in case of an emergency.

NOTICE

„never run engine without an air fi lter or with a dirty air fi lter. Severe engine damage may occur. Service air fi lter frequently to prevent engine malfunction.

„never tamper with the factory settings of the engine or engine governor. Damage to the engine or equipment can result if operating in speed ranges above the maximum allowable.

page 8 — WM70SH5C/wm70sh8c Mixer • operation and parts manual — rev. #0 (06/07/11)

Page 7 Page 9
Page 8
Image 8
Multiquip WM70SH5C, WM70SH8C manual Mixer SaFeTY, Engine SaFeTY gaSoline ModelS onlY, Before servicing equipment
Page 7 Page 9

WM70SH8C, WM70SH5C specifications

The Multiquip WM70SH5C and WM70SH8C are cutting-edge water pump models designed for construction and industrial applications. These robust machines are specifically engineered to handle a variety of heavy-duty pumping tasks, making them an essential asset for contractors and industrial operators alike.

The WM70SH5C model is powered by a reliable 5.5 HP Honda engine, while the WM70SH8C variant features an 8 HP Honda engine, providing additional power for demanding applications. Both models are equipped with a high-performance centrifugal pump, ensuring efficient water transfer and quick operation. They are capable of moving large volumes of water, making them suitable for dewatering, irrigation, and other water management tasks.

One of the standout features of the WM70SH series is their impressive maximum flow rate. The pumps can deliver up to 2,000 gallons per minute, significantly reducing the time required for water removal in flooded areas or construction sites. This efficiency is crucial in maintaining project timelines and ensuring safety in work environments.

Durability is another key characteristic of these models. The WM70SH5C and WM70SH8C are built with heavy-duty materials, including a cast iron pump housing and aluminum alloy components, which resist corrosion and ensure a long operational lifespan. Additionally, their rugged construction allows them to withstand harsh working conditions, making them reliable even in the toughest environments.

Ease of use and maintenance is also a priority in the design of these pumps. The WM70SH series features an easy-access maintenance panel that simplifies routine checks and service procedures. The equipped oil alert system helps prevent engine damage by shutting down the engine if the oil level is too low, providing peace of mind for operators.

Both models are designed for portability, with integrated handles and a lightweight frame that facilitate easy transportation. This mobility makes the WM70SH series ideal for contractors who need to move equipment frequently from one job site to another.

In summary, the Multiquip WM70SH5C and WM70SH8C water pumps stand out in the market for their powerful performance, robust construction, and ease of use. They are designed to deliver efficiency, reliability, and durability, making them an excellent choice for any water pumping requirements in construction and industrial applications. With features catering to the demands of heavy-duty tasks, these pumps enhance productivity while ensuring operational safety.
Top Page Image Contents