start-up

6.Place the belt slip lever (Figure 14) in the START/STOP (disengaged) position.

START/STOP

POSITION

STOP

DRUM LATCH PIN

BELT SLIP

LEVER

Figure 14. Belt Slip Lever

(Start/Stop Position)

CAUTION

Make certain the drum lock pin (Figure 15

and Figure 16) is placed to the RIGHT (when

viewing the mixer from the towpole end) of the drum stop block which is welded to the front side of the drum. Also make sure lock pin is fully

engaged (locked).This will prevent the drum from tipping.

LOCK

PIN

FRONT

POST

DRUM

Figure 15. Drum Lock Pin (Side-View)

BLOCK

TOW OR LOCKED

POSITION

Figure 16. Drum Lock Pin (Right Position)

7.Pull the starter grip (Figure 17) lightly until you feel resistance, then pull briskly. Return the starter grip gently.

Figure 17. Starter Grip

8.Place the belt slip lever (Figure 18) in the mix position. This will tilt the engine placing tension on the V-belts enabling the shaft to rotate.

BELT SLIP

MIX

POSITION

LEVER

 

Figure 18. Belt Slip Lever (Mix Position)

WM70SH5C/wm70sh8c Mixer • operation and parts manual — rev. #0 (06/07/11) — page 21

Page 20 Page 22
Page 21
Image 21
Multiquip WM70SH8C, WM70SH5C manual Belt Slip Lever Start/Stop Position
Page 20 Page 22

WM70SH8C, WM70SH5C specifications

The Multiquip WM70SH5C and WM70SH8C are cutting-edge water pump models designed for construction and industrial applications. These robust machines are specifically engineered to handle a variety of heavy-duty pumping tasks, making them an essential asset for contractors and industrial operators alike.

The WM70SH5C model is powered by a reliable 5.5 HP Honda engine, while the WM70SH8C variant features an 8 HP Honda engine, providing additional power for demanding applications. Both models are equipped with a high-performance centrifugal pump, ensuring efficient water transfer and quick operation. They are capable of moving large volumes of water, making them suitable for dewatering, irrigation, and other water management tasks.

One of the standout features of the WM70SH series is their impressive maximum flow rate. The pumps can deliver up to 2,000 gallons per minute, significantly reducing the time required for water removal in flooded areas or construction sites. This efficiency is crucial in maintaining project timelines and ensuring safety in work environments.

Durability is another key characteristic of these models. The WM70SH5C and WM70SH8C are built with heavy-duty materials, including a cast iron pump housing and aluminum alloy components, which resist corrosion and ensure a long operational lifespan. Additionally, their rugged construction allows them to withstand harsh working conditions, making them reliable even in the toughest environments.

Ease of use and maintenance is also a priority in the design of these pumps. The WM70SH series features an easy-access maintenance panel that simplifies routine checks and service procedures. The equipped oil alert system helps prevent engine damage by shutting down the engine if the oil level is too low, providing peace of mind for operators.

Both models are designed for portability, with integrated handles and a lightweight frame that facilitate easy transportation. This mobility makes the WM70SH series ideal for contractors who need to move equipment frequently from one job site to another.

In summary, the Multiquip WM70SH5C and WM70SH8C water pumps stand out in the market for their powerful performance, robust construction, and ease of use. They are designed to deliver efficiency, reliability, and durability, making them an excellent choice for any water pumping requirements in construction and industrial applications. With features catering to the demands of heavy-duty tasks, these pumps enhance productivity while ensuring operational safety.
Top Page Image Contents