1-14 LAYOUT & INSTALLATION
Specifying initial settingsIf you press [Reset] during initial setup, your machine returns to Standby mode. But it
will keep the settings you saved by pressing [Enter] as described below.
1 Switch to the Fax mode by pressing [
COPY
FAX
SCAN]
.
Language
2 Press [Menu], [9], [Enter].
The machine will show the current language setting.
Language :English
/
/Enter
3 Press [ ] or [ ] until your desired language appears.
Then press [Enter] to save the setting and continue.
Date & Time
4 The machine will show the current calendar/clock setting.
TimeYearMonth
Enter Time
01/01 '04 00:00
Day
5 Use the numeric keys to enter the correct date in the MMDDYY format and time in
the 24-hour format.
For instance, to set 2:15 PM on November 27, 2004, press [1], [1], [2], [7], [0], [4], [1],
[4], [1], [5]:
To change a digit, press [ ] to move the cursor left or [ ] to move it right. Then,
enter the correct digit.
6 Press [Enter] to save the clock setting and continue.
Daylight savings
7 The machine will now ask if you want to set the calendar/clock to automatically recog-
nize daylight saving time (DST).
Daylight Saving :Off
/
/Enter
When the setting is “On,” your machine will automatically recognizes DST at 2 AM on
the appropriate switchover Sundays each year.
When the setting is “Off,” no automatic change will occur.
8 Press [ ] or [ ] to select “On” or “Off”, then press [Enter] to save the setting.
Fax reception mode
9 The machine now shows the machine’s current reception mode.
Fax Ready
/
/Enter
10 For now, select “Fax Ready”. (For details on the reception modes, see “Selecting the
reception mode” on page 5-2.)
11 Press [Enter] to save the setting and continue.