Connecting Microphone(s) |
|
| |||
The Escort | ™ 2000 powered mixer is designed to work with any | ||||
microphone such as the PVi | ® microphone supplied. Connect the microphone(s) to the XLR (3- pin) | input connectors as | |||
shown | (Fig. 4). When | using more than one mic, try to connect them to channels in the same order as they appear on |
| ||
stage | to make them easier | to control. |
|
|
Fig. 4
Connecting CD, Tape, or Other Line Sources
Connect a CD or tape player to the CHANNEL 5 auxiliary input connectors (AUX IN) as shown (Fig 5). If you wish to connect an additional tape machine, CD or other line source to the Escort 2000, CHANNEL 5 also has
stereo line inputs and CHANNELS
Fig. 5
Connecting Power
Before connecting power, make sure that the power switch is in the OFF position.
Connect the IEC power cord to the receptacle on the back panel of the unit as shown (Fig. 6), and then to a
suitable electrical outlet. If an extension cord is used, be sure that it is a
NOTE: FOR UK ONLY
If the colors of the wires in the mains lead of this unit do not correspond with the colored markings identifying the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E, the earth symbol, colored green, or colored green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. (3) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.
5