Marrakesh™
Fan preparation
Step 17. Align the motor cover key hole slots with the three screws in the motor adapter. Once the cover clears the screw and washers, turn
Step 18. Securely tighten the screws by hand until snug.
Key hole slot
hanging the fan
Step 19. To hang the fan body in the canopy, hold the fan body firmly and insert the nylon ball into the canopy opening. Check that no wires were pinched. Rotate the fan body until the slot in the nylon ball engages the canopy pin opposite the canopy hatch opening.
Motor wires
&
downrod
ground
Fan weighs 40 lbs. | ball |
| |
|
|
house wiring
&
crossbar
ground
canopy
slot
canopy
pin
CANOPY ELECTRICAL CONNECTIONS
Step 20. Connect the fan wires to the outlet box wiring by placing the bare ends of the wires together and then securing with a wire nut.
Connect in this order:
•GREEN leads from mounting plate and fan to
GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box.
Secure with wire nut.
•BLACK wire from fan to black POWER wire in ceiling fixture outlet box.
Secure with wire nut.
Inspect each wire nut and ensure that no bare wire is visible; pull on each wire to test the connection is mechanically sound.
2WHITE WIRES
3GREEN WIRES
2BLACK wires
9
