Lexmark 4600 Series Installing the printer on other computers, Wireless Setup menu, TCP/IP menu

From here

TCP/IP

File Print

Reset Network Adapter Defaults

Wireless Setup menu

From here

Network Name

Wireless Signal Quality

You can

View network settings.

Choose whether to select a network computer automatically or manually for File Print jobs.

•If the setting is Auto Select, then the printer selects a network computer automatically.

•If the setting is Manual, or if the setting is Auto Select but the network computers detected by the printer require a PIN, then you need to select a network computer from the File Print menu.

Reset the internal wireless print server to factory default settings.

You can

View the current Service Set Identifier (SSID).

View the wireless signal strength.

TCP/IP menu

From here

View IP Address

View IP Netmask

View IP Gateway

You can

View the IP address currently assigned to the printer.

View the subnet mask currently configured for the printer.

View the currently configured gateway IP address for the network.

Installing the printer on other computers

Once the printer is configured, it can be accessed wirelessly by any other computer on the network. However, you will need to install the printer driver on every computer that will access it. You do not need to configure the printer again, although you will need to run the setup software on each computer to install the driver.

Using Windows

1Insert the installation software CD.

2Wait for the Welcome screen to appear.

If the Welcome screen does not appear after a minute, do one of the following:

In Windows Vista

aClick .

bIn the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

40