Lexmark 4600 Series manual Retrieving and managing photos, USB connection

Note: The printer recognizes one active media device at a time. If you insert more than one media device, a message appears on the display prompting you to designate the device you want the printer to recognize.

Retrieving and managing photos

Transferring photos from a memory device to the computer

Using the printer control panel

Notes:

•You cannot transfer photos from a memory device to a computer through an external network adapter that does not support memory device connection.

•The printer may require that you select a computer (and a PIN if required by that computer).

1Insert a memory card, flash drive, or digital camera set to mass storage mode.

2From the printer control panel, press .

3 Press the arrow buttons until Save Photos appears, and then press .

4Do one of the following:

USB connection

aPress .

bPress .

cOn the computer screen, select an option to save photos to the computer.

dFollow the instructions on the computer screen.

Wireless connection (selected models only)

aPress the arrow buttons until Network appears, and then press .

bIf prompted, press the arrow buttons to select the network computer where you want to save the photos, and then press .

Notes:

•You may be prompted to enter a PIN if the computer requires it. To assign a computer name and a PIN to the network computer, see the Help for the printer software associated with your operating system.

•Use the arrow buttons to increase or decrease the value for each digit (the default value is 0000) in the PIN, and then press each time you select a digit.

75