Lexmark 4600 Series Changing wireless settings after installation, Using the Network Setup menu

–The printer is trying to establish communication with the wireless access point (wireless router).

This is true if you have already configured the printer for use on your wireless network. When the printer has been configured, any time you turn the printer off and then turn it back on, the internal print server in the printer will try to connect to your wireless access point (wireless router).

–The wireless settings of the printer may no longer be valid.

•Green indicates that the printer is connected to a wireless network.

The light should be in this state when you want to start using the printer that is already set up on your wireless network.

•Blinking green indicates that the printer internal print server is being updated.

Changing wireless settings after installation

To change wireless settings on the printer, such as the configured network, the security key, or other settings:

Using Windows

1Do one of the following:

•In Windows Vista, click .

•In Windows XP and earlier, click Start.

2Click All Programs or Programs, and then select the printer program folder from the list.

3Click Tools ΠLexmark Wireless Setup Utility.

Note: If the cable is not already connected, you may be prompted to connect the printer to the computer again using the installation cable as part of the setup process.

4Follow the prompts on the computer screen to reinstall the software, and then make the changes that you want.

Using Macintosh

1From the Finder desktop, double-click the printer folder.

2Double-clickLexmark Wireless Setup Assistant.

3Follow the instructions on the computer screen.

Using the Network Setup menu

The Network Setup menu is available only if your printer model has an internal wireless print server, and if the printer is connected to a network. Use this menu to view the wireless settings of the printer, print a network setup page, and reset the internal wireless print server.

1From the printer control panel, press .

2 Press the arrow buttons until Network Setup appears, and then press .

From here

Print Setup Page

Wireless Information

You can

Print a network setup page.

View the network name of the current active network and the signal strength of the connection.

39