blade holder, medallion and blade assembly
Step 6. Align the medallion over the bracket, with the set screw towards the edges of the blade and place the medallion over the wider end of the bracket. When it feels engaged, push on it until the other end snaps in place.
Step 7. Using the allen wrench, tighten the set screw by hand until snug.
Step 8. Repeat step 5 through 7 until all 3 blade assemblies are complete.
Step 9. Remove the motor sheild from the top of the motor,
note the caution message and read the instruction carefully.Note: Write down the Serial Number and the model number for future reference.
FAN
BODY
Motor sheild
6