CONTENTS |
|
INTRODUCTION | 1 |
mounting recommendations | 2 |
fan INSTALLATION | 10 |
OPTIONAL EXCLUSIVE LIGHT FIXTURE INSTALLATION | 11 |
control features: |
|
Versa•Touch 2 | 14 |
troubleshooting | 16 |
READ AND SAVE THESE INSTRUCTIONS |
|
SAFETY FIRST |
|
Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product and proper installation; therefore, before attempting to install and operate your Casablanca fan, read this owner’s manual completely and carefully. Retain this manual for future reference.
CAUTION: To avoid possible electrical shock, make certain that electricity is turned off at the circuit breaker or fuse box before attempting any installation procedure.
BEFORE YOU START
•CAUTION: RISK OF ELECTRICAL SHOCK! All wiring must be performed in accordance with national and local electrical codes. If you are unfamiliar with the wiring codes, you should use a qualified electrician. To avoid overheating and possible damage to other equipment, do not install control to a receptacle, fluorescent light fixture, motor operated appliance, or
•This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling installations.
•This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum current requirement for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light current is 2.8 amps or 340 watts of lighting.
•Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make sure all wires are within the canopy and that no wires are being pinched.
For best performance and for your warranty to be valid,
use only genuine Casablanca blades, light fixtures, and accessories.
NOTES
•The blades in each pack are matched for equal weight to assure smooth fan operation. If more than one fan is being installed, be careful not to mix blades from different cartons.
•Inspect the contents of your carton for possible shipping or handling damage and report any such damage directly to your authorized Casablanca dealer.
•It is always a good idea to have an assistant to help with the installation.
•When cleaning, painting, or working near your fan, be very careful of the fan and blades. Always turn the power OFF to the ceiling fan before servicing it, working on it, or replacing light bulbs.
•Never insert anything into the path of the fan blades while the fan is in operation.
•Never install a fan over a pool or spa.
•Never operate a fan that has been damaged in any way. Contact Casablanca Fan Company by calling
FUSE BOX
(Remove fuse for the circuit you will be working on)
CIRCUIT BREAKER
(Trip breaker for the
circuit you will be
working on)
18″
70″
84″
PN 8943540 AT0708
1
