![](/images/new-backgrounds/1228755/22875515x1.webp)
FIGURE 2 Hydrostatic Inflator Cap
Water Inlet Valve
| Black Locking Ring | |
| Yellow Inflator Cap | |
| Cap/Locking Ring | |
Single | Tabs | |
Lanyard | ||
Point | ||
Status |
| |
Indicator | Inflator | |
| ||
| Body | |
| Expiry | |
| Date | |
| Manual Inflation | |
|
Uninspected Commercial Vessel Use
This Inflatable PFD is not approved for “hot work” and care must be taken to avoid damage from abrasion and sharp objects.
Component Inspection Instructions
1)Examine the single point indicator through the window panel. Ensure the single point indicator is green. If the single point indicator is red, the mechanism has been fired or is incorrectly fitted (Fig. 2). See
NOTE: The single point indicator must be green before proceeding.
2)Open the cover at wearer’s
3)Ensure the
4)Ensure the single point indicator is green and the
5)Ensure the date on the inflator is not five years or older (Fig. 2). If it
5 | MUSTANG SURVIVAL |