Mustang Survival MD0450 manual Re-arming Your PFD

Re-arming Your PFD

NOTE: A valid re-arm kit (MA7218) is required for this procedure.

1)Place the Inflatable Vest with LIFTTM on a smooth, flat surface and wipe off any water. Access the inflator by reaching under the cover and pull it toward you, turning the cell and cover inside-out to fully

expose the inflator for re-arming. Hold the CO2 cylinder through the fabric, using one hand (Fig. 12).

FIGURE 12

2)Insert the metal key between the black locking ring and labeled yellow cap. Turn the key counter-clockwise (Fig. 13).

FIGURE 13
Locking Ring	Key

13 MUSTANG SURVIVAL