Fisher & Paykel DW60CC, DW60CE manual 34Using rinse aid, When to refill the rinse aid dispenser

Rinse aid indicators

34Using rinse aid

We highly recommend using liquid rinse aid regularly to get the best drying results. Rinse aid gives a streak-free, sparkling clean look to glass and chinaware. In addition, it prevents metal from tarnishing.

When to refill the rinse aid dispenser

When rinse aid level becomes low, the rinse aid indicators on the dispenser and the control

panel will light up to remind you to refill the dispenser.

Adjusting the rinse aid dosage

The normal, factory-set dosage level is 4, but you may need to adjust this to suit your water conditions. Insert a flat-bladed screwdriver into the slot of the dosage regulator arrow, and turn it to the desired level. If there is excessive foaming at the end of the wash, reduce the dosage.

If you live in a hard water area or if dishes are wet or streaky after drying, increase the dosage.

If you are using tablets with built-in rinse aid, we recommend setting the rinse aid dosage level to 1. On CC models, you may wish to turn the rinse aid off altogether and/or select the correct detergent type (tablet with rinse aid).

See section ‘User preference settings’ for how to do this.

CE models only

CC models only

READY
TO WASH
Normal	NO D

How to refill the rinse aid dispenser

1Press the button to snap the dispenser cover open.

2Pour rinse aid into the circular opening, making sure not to fill beyond the MAX marking.

Important!

Take care not to spill rinse aid into the dishwasher. Any spills
must be wiped up to prevent excess foaming. Failure to do so
may result in a service call, which will not be covered by warranty.	Dosage regulator
3 Close the cover, making sure it clicks shut.	Press to open