Installation instructions
Plumbing -- Waste connection
11
These drainage options are designed to eliminate problems that occur with combined
Drainage option A: Separate sink and dishwasher waste systems
The standpipe must have a minimum diameter of 38 mm and stand 750 mm above the floor. Use the supplied drain hose support to hold the drain hose in place in the standpipe.
Important!
We do not recommend connecting the drain hose or drain pipe directly to a
|
|
| Waste disposal |
min. |
|
| unit (optional) |
120 | min. |
|
|
mm |
| Waste | |
750 mm |
| ||
|
| ||
min.38 mm | min. | Water | |
|
| 750 mm | |
|
|
| Waste |
|
|
| min. 200 mm |
| Power outlet with | Hose supplied |
|
| disconnection switch |
|
|
Drainage option B: Combined sink and dishwasher waste systems
When connecting the drain hose to a sink trap with a drain hose spigot, make sure that the drain hose is supported to the height of the bench.
Ensure the drain spigot has a minimum hole diameter of 15 mm and it has been drilled out. Secure the drain hose connection with the clip supplied.
Ensure drain hose is supported to height of bench
| Ø | 2 | 1 | mm | 5mm | Vent | |
. |
|
| Ø1 |
| |||
|
|
|
| ||||
min |
|
|
| . |
|
| |
| min |
|
| Waste | |||
|
|
|
| ||||
|
|
|
|
|
| Hose supplied | Water |
|
|
|
|
|
|
| min. 200 mm |
Power outlet with disconnection switch