Controls and starting a wash - CE models 17
heavy normal normal fast delicate rinse eco
CE MODELS
Programme | Programme | Start/Pause |
selector | indicators |
|
To select and start a wash programme
1Make sure that the dishwasher is powered on 
.
2Press 
until the indicator of the desired programme lights up.
3 Press 
to start the programme.
After 5 seconds, the selected programme indicator will start flashing, the dishwasher will beep once and the wash will start automatically.
The display will show the approximate time remaining.
Note: the dishwasher will remember the last programme used.
To pause and restart a wash programme
1Press 
to pause the programme.
2 Open the door very slowly.
Important!
There is a risk of being sprayed with hot water. Do not fully open the door until the spray arms have stopped rotating.
3Load, remove, or rearrange any dishes if needed.
4Check that there is no excessive steam, then close the door.
Important!
If the programme is paused when the dishwasher has already heated the water, leave the door ajar for several minutes before closing it again; if you don’t, the expanding steam inside could force the door open.
5 Press 
to restart the programme.
