|
| Troubleshooting |
| 41 |
|
|
|
| |
Problem | Possible cause | What to do |
| |
Dishes, cutlery have Rinse aid dosage too low. | Increase rinse aid dosage. See ‘Using rinse |
| ||
not dried. |
| aid’. |
| |
|
|
| ||
| Items removed too soon. | After the end of the wash programme, leave | ||
|
| the door ajar and wait for several minutes to | ||
|
| help drying. |
| |
Rinse aid dispenser empty. (The rinse aid indicators are lit.)
Add rinse aid. See section ‘Using rinse aid’ for instructions.
Glasses have dull | Rinse aid dosage too low. | Increase rinse aid dosage. See ‘Using rinse |
appearance. |
| aid’. |
Tea stains or traces | Not enough detergent. | See section ‘Wash programmes and |
of lipstick have not |
| detergent quantities’ for recommended |
been completely |
| quantities. You may need to adjust these to |
removed. |
| suit your particular load. |
| Wash temperature too low. | Select a wash programme with a higher |
|
| temperature (see section ‘Wash programme |
|
| data’ for information). |
Traces of rust on | Cutlery is not sufficiently | Wash by hand. |
cutlery. | rustproof. |
|
Glasses clouded | Hard water situation. | Increase detergent quantities. |
and discoloured; | Glasses are not dishwasher | Wash by hand. |
milky coating | proof. |
|
Water marks left on | Rinse aid level or dosage | Ensure there is rinse aid in dispenser. If |
glasses and cutlery. | setting is too low. | necessary, increase the rinse aid setting or |
|
| try using a wash programme with a higher |
|
| temperature. See sections ‘Using rinse aid’ |
|
| and ‘Wash programme data’. |
Fan noise | This is normal. A drying |
coming from the | fan will continue to run for |
dishwasher after a about an hour after a wash
wash | or until the door is opened. |
(CC models only). |
|
No action required. If you would like the drying fan to stop, open the dishwasher door.
